Spectranet ROM images
Installers
This is probably what you've come here looking for, especially if you had a firmware upgrade go bad. If you can't get to the Spectrum copyright message because your Spectranet has bad firmware, close jumper J2 to disable the automatic page-in, then reset your Spectrum. You can then send the TZX or TAP file via an audio cable and reprogram the Spectranet.
TAP and TZX files:
CLEAR 26999 LOAD "" CODE (play the TAP or TZX file to the Spectrum) RANDOMIZE USR 27000
Binary files:
You can use the ethup tool to send the binary image to a Spectrum if your Spectranet is working. You can also load it with the %aload command from a filesystem.
CLEAR 26999 (send the binary image) RANDOMIZE USR 27000
Base system only installers
If you have a custom module setup, you might want to only install/update the base system and leave the modules untouched. The procedure is the same as for the above full installers.
Back to Downloads