SpectraDVI

From Spectrum
Revision as of 21:26, 19 September 2012 by Winston (talk | contribs) (Created page with "This project is in its early planning phase, and there's nothing definite yet about the form this project will take. The overall goals will be: * A ULA+ implementation that imp...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This project is in its early planning phase, and there's nothing definite yet about the form this project will take.

The overall goals will be:

  • A ULA+ implementation that implements DVI-D (compatible with HDMI) output in 480p resolution.
  • Implemented most likely using a Spartan-6SLX9 FPGA in a TQFP-144 package.
  • Will not require the user to open up the Spectrum to use - it'll just plug into the back.
  • Compatible with 48K, 128K, +2 and +3

Secondary objectives:

  • Small embedded CPU in the FPGA to provide information overlays on the screen (such as telling the user if there's a problem, or providing information displays).
  • Allow the DVI buffer to be de-linked from the shadow Spectrum screen, so that the Spectrum can write to the DVI frame buffer in the FPGA.

Maybe I'll think about it objectives:

  • VGA out (less likely; will require a number of extra components to implement)