Difference between revisions of "Ethup"
Jump to navigation
Jump to search
(New page: The ethup utility is a simple command line utility to upload data to the Spectrum, using a ''very'' simple protocol. The protocol is as follows: bytes 0,1: Start address, LSB first byte...) |
|||
| Line 14: | Line 14: | ||
When the ethup utility is used to send data to the "Add and remove ROM modules" utility, accessed via the NMI menu, the start address is ignored. | When the ethup utility is used to send data to the "Add and remove ROM modules" utility, accessed via the NMI menu, the start address is ignored. | ||
== Download == | |||
The ethup utility can be downloaded here: | The ethup utility can be downloaded here: | ||
* [http://spectrum.alioth.net/tools/ethup-linux-x86.tar.gz Linux x86 (.tar.gz)] | |||
* [http://spectrum.alioth.net/tools/ethup-windows-x86.zip Windows x86 (.ZIP)] | |||
For other systems, download the source from WebSVN and build it: [http://spectrum.alioth.net/svn/listing.php?repname=Spectranet&path=%2Ftrunk%2Fdevtools%2F#_trunk_devtools_] | |||
[[Category:Spectranet]] | [[Category:Spectranet]] | ||
Revision as of 15:38, 30 January 2009
The ethup utility is a simple command line utility to upload data to the Spectrum, using a very simple protocol. The protocol is as follows:
bytes 0,1: Start address, LSB first bytes 2,3: Length, LSB first bytes 4..: The data
and uses TCP port 2000.
The ethup utility has the following parameters:
ethup <network-address> <filename> <startaddress>
The startaddress parameter is optional. If the startaddress is left out, then it defalts to 0x8000 (32768, decimal).
When the ethup utility is used to send data to the "Add and remove ROM modules" utility, accessed via the NMI menu, the start address is ignored.
Download
The ethup utility can be downloaded here:
For other systems, download the source from WebSVN and build it: [1]