User Guide
Jump to navigation
Jump to search
Before you plug it in
The most important points to note:
- Like any Spectrum peripheral, only connect it to the edge connector with the Spectrum powered off. (The ethernet port, however, is hot pluggable like any other ethernet port).
- If other peripherals are to be used at the same time - if they have their own ROM, they should be plugged into the Spectranet's through port, or else the Spectranet ROM and the other peripheral's ROM might get paged in at the same time, causing a crash.
- If you are using a +3 or late model +2, make sure J3 is jumpered. For other models, make sure J3 has no jumper.
Prototype / Development board: User guide
The following short sections introduce the Spectranet, and provide a guide to getting it set up on your network.
- Hardware overview - Getting to know the hardware.
- Spectranet Configuration - Getting it set up on your network.